F-35

Joint Strike Fighter

Guanli

ARF (Airframe Kit Only)

Click to view larger images.

The Kit arrives in a carboard box, within another carboard box.
Contents :

• 1x F-35 Raptor foam jet airframe
• 1x Instructions: 935grams; 4CH-6CH, 4-5 Blade, 2826 out-runner motor, 1800Mha, 14v
• 1x Landing gear (metal & plastic)
• 1x 70mm EDF unit
• 1x Decals

Parts Shopping List

F-35 ARF Kit (Australia) :

TX/RX, 4 Channel : EBay.com.au (FS-CT6B) | HobbyKing.com (HK-T6Av2) , HobbyKing.com (HK6S)

SG90 Servo, x2 : EBay.com.au (SG90)

Glue, lots of glue : EBay.com.au | HobbyKing.com (thin), HobbyKing.com, and your local RC hobbyshop

Clear sticky tape, Contact protective plastic film (clear) if not using glass fiber and epoxy, Thin 3mm Bamboo 25cm long Skewers if not using 3mm flat carbon fiber rods: your local supermarket

The list above can be changed, at time of purchace the cheapest was selected. Some items were purchaced with other items not listed here, this was done to lower the shipping costs where possible. All posted items were from Japan, China and Australia. Free shipping Auctions are first preferance during item slection. Postage waiting times of posted items ranged from 2 days to 4 weeks.

Flight location, and Radio

1000m above sea level.
Air temp -5C to 35C.
Wind-speeds 0 to 5km.
Actual total flying weight 600g.
Wing span 770mm.
Aircraft Length 1100mm.
6ch Radio with 3ch mixing.